NEWS: Bendigo Saw has relocated to 22-24 Ramsay Court, Kangaroo Flat Vic

ALUMINIUM NEGATIVE RAKE

ALUMINIUM NEGATIVE RAKE
  • NEOMAX 160MM X 56 ALUMINIUM BLADE
    Application:
    Aluminium, Melamine and Board, Portable Hand Saws
    Specifications:
    160MM DIAMETER, 2.2 KERF, 1.8 PLATE 20MM BORE, 56 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7201602056
    $165.21 (ex GST)
  • NEOMAX 190MM X 60T ALUMINIUM BLADE
    Application:
    Aluminium, Melamine and Board, Portable Hand Saws
    Specifications:
    190MM DIAMETER, 2.7 KERF, 2.2 PLATE 30MM BORE, 60 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7201903060
    $169.54 (ex GST)

    Ideal for fine cuts to thin extrusions and sheet aluminium, this blade is recommended for use in portable power saws, drop saws and compound mitre saws.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports.
    Diameter 190mm, 60 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 210MM X 60T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    210MM DIAMETER, 2.7 KERF, 2.2 PLATE 30MM BORE, 60 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7202103060
    $185.55 (ex GST)

    Ideal for fine cuts to thin extrusions and sheet aluminium, this blade is recommended for use in portable power saws, drop saws and compound mitre saws.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports.
    Diameter 210mm, 60 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 216MM X 60T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    216MM DIAMETER, 2.7 KERF, 2.2 PLATE, 30MM BORE, 60 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7202163060
    $187.97 (ex GST)

    Ideal for fine cuts to thin extrusions and sheet aluminium, this blade is recommended for use in small drop saws and compound mitre saws.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports.
    Diameter 216mm, 60 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 250MM X 120T ALUMINIUM BLADE
    • NEOMAX 250MM X 120T ALUMINIUM BLADE
    • NEOMAX 250MM X 120T ALUMINIUM BLADE
    • NEOMAX 250MM X 120T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    250MM DIAMETER, 2.2 KERF, 1.8 PLATE, 30MM BORE, 120 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72025030120
    $326.52 (ex GST)

    Ideal for very fine cuts to thin extrusions and sheet aluminium, this blade has a super thin kerf allowing cleaner and more precise cuts.
    Recommended for use in situations where standard blades produce burs on workpiece and experience excessive heat generation.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 250mm, 120 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 250MM X 60T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    250MM DIAMETER, 3.1 KERF, 2.6 PLATE, 30MM BORE, 60 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7202503060
    $239.96 (ex GST)

    Ideal for standard cuts to medium & large extrusions and sheet aluminium, this blade will perform faster cuts where less accuracy is required.
    Recommended for use in situations where standard blades perform slowly and experience swarf blocking up tooth gullets.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 250mm, 60 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 250MM X 80T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    250MM DIAMETER, 3.1 KERF, 2.6 PLATE, 30MM BORE, 80 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7202503080
    $261.95 (ex GST)

    Ideal for fine cuts to medium extrusions and sheet aluminium, this blade will perform faster cuts while providing a clean finish.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum working speeds.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 250mm, 80 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 300MM X 120T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    300MM DIAMETER, 3.1 KERF, 2.6 PLATE, 30MM BORE, 120 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72030030120
    $430.50 (ex GST)

    Ideal for very fine cuts to thin extrusions and sheet aluminium, can be used on some panel saw machines.
    Recommended for use in situations where standard blades produce rough cuts and experience excessive heat generation.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum working speeds
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 300MM X 144T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    300MM DIAMETER, 2.4 KERF, 2.0 PLATE, 30MM BORE, 144 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72030030144
    $518.77 (ex GST)

    Ideal for ultra fine cuts to thin extrusions and sheet aluminium, this blade has a thin kerf allowing cleaner and more precise cuts.
    Recommended for use in situations where standard blades produce rough cuts, burring and experience excessive heat generation.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools, some panel saw machines.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 300mm, 144 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 300MM X 72T ALUMINIUM BLADE
    • NEOMAX 300MM X 72T ALUMINIUM BLADE
    • NEOMAX 300MM X 72T ALUMINIUM BLADE
    • NEOMAX 300MM X 72T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    300MM DIAMETER, 3.3 KERF, 2.8 PLATE, 30MM BORE, 72 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7203003072
    $303.09 (ex GST)

    Ideal for standard cuts to medium & large extrusions and sheet aluminium, this blade will perform faster cuts where less accuracy is required.
    Recommended for use in situations where standard blades perform slowly and experience swarf blocking up tooth gullets.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 300mm, 72 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 300MM X 96T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    300MM DIAMETER, 3.3 KERF, 2.8 PLATE, 30MM BORE, 96 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    7203003096
    $337.66 (ex GST)

    Ideal for fine cuts to thin and medium extrusions and sheet aluminium, this blade will perform faster cuts while providing a clean finish.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum work speeds.
    Can be used with Makita, Milwaulkee, Metabo, Dewalt, Ozito, Bosch & Festool power tools.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements.
    Diameter 300mm, 96 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 330MM X 100T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    330MM DIAMETER, 3.5 KERF, 3.0 PLATE, 32MM BORE,100 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72033032100
    $430.36 (ex GST)

    Ideal for fine cuts to thin and medium extrusions, this blade will perform faster cuts while providing a clean finish.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum work speeds.
    Suitable for aluminium processing, docking & mitre saw machinery and cutting centres.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements & SOFSOUND noise compression.
    Diameter 330mm, 100 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 350MM X 108T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    350MM DIAMETER, 3.5 KERF, 3.0 PLATE,30MM BORE, 108 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72035030108
    $412.22 (ex GST)

    Ideal for fine cuts to thin and medium extrusions, this blade will perform faster cuts while providing a clean finish.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum work speeds.
    Suitable for aluminium processing, docking & mitre saw machinery and cutting centres.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements & SOFSOUND noise compression.
    Diameter 350mm, 108 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 380MM X 108T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    380MM DIAMETER, 3.5 KERF, 3.0, PLATE, 32MM BORE 108 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72038032108
    $478.07 (ex GST)

    Ideal for fine cuts to thin and medium extrusions, this blade will perform faster cuts while providing a clean finish.
    Recommended for use in situations where a clean finish is required whilst maintaining optimum work speeds.
    Suitable for commercial aluminium processing, docking & mitre saw machinery and cutting centres.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements & SOFSOUND noise compression.
    Diameter 380mm, 108 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.

  • NEOMAX 400MM X 120T ALUMINIUM BLADE
    Application:
    Aluminium Section and Thin Wall Extrusions
    Specifications:
    400MM DIAMETER, 3.6 KERF, 3.0 PLATE, 30MM BORE, 120 TEETH, T.CHIP-NEG/TFN
    Stock Code:
    72040030120
    $526.20 (ex GST)

    Ideal for fine cuts to thin extrusions, this blade has a very thin kerf allowing cleaner and more precise cuts.
    Recommended for use in situations where a very clean finish is required in thin material at standard cutting speeds.
    Suitable for commercial aluminium processing, docking & mitre saw machinery and cutting centres.

    Features & Specifications:
    Negative triple-chip tooth with noise reduction silencing ports, includes copper silencing elements & SOFSOUND noise compression.
    Diameter 400mm, 120 Teeth - Tungsten Carbide Tipped
    Manufactured in Australia from German Saw Steel
    NOTE: Centre bore washers are available on request to suit various alternative bore sizes.